Possible Desktop Charging Cradle for Q9m !!

Discussion in 'Moto Q 9m' started by wannaQ, Sep 14, 2007.

  1. wannaQ

    wannaQ New Member

    Joined:
    Feb 26, 2007
    Messages:
    228
    Likes Received:
    0
    Possible Desktop Charging Cradle for Q9m !!

    As many of us have discovered, the new Q9m does not fit in the original Motorola Q OEM cradle, it's slightly too thick for the track.

    I discovered this cradle from BoxWave and thought I would give it a try with the Q9m (the version WITH spare battery charger):

    http://www.boxwave.com/products/desktopcradle/verizon-motorola-q-desktop-cradle_1275.htm

    [​IMG]
    Well, it didn't work out of the box, so I was able to pull off the little BoxWave logo tab on the front and, what da ya know, it fit!

    [​IMG]

    The little plug icon appeared in the upper right corner. The only caveat, I get a warning screen from the device that says it is not a supported charger. I am testing it now to see if it actually charges the device over the next several hours and will report my findings.

    Looks promising though until someone comes out with something that is officially supported.


    [​IMG]
  2. JBK617

    JBK617 New Member

    Joined:
    Sep 2, 2007
    Messages:
    580
    Likes Received:
    0
    Any update to this, did it work?
  3. DslLmi

    DslLmi New Member

    Joined:
    Sep 9, 2007
    Messages:
    150
    Likes Received:
    0
    Now here is the fun question. What about if you have the extended battery. will it fit?

Share This Page