Napoleon Hidden Key Sequences

Discussion in 'Moto Q 9n' started by wnrussell, Jun 20, 2009.

  1. wnrussell

    wnrussell Active Member

    Joined:
    Sep 2, 2008
    Messages:
    1,314
    Likes Received:
    1
    Napoleon Hidden Key Sequences

    Here are the hidden codes for the Napoleon. They were taken in the research center when the phone was first released.

    [​IMG]

    [​IMG]

    [​IMG]
  2. natieya

    natieya Member

    Joined:
    Mar 28, 2009
    Messages:
    99
    Likes Received:
    0
    I can't get any of these to work. Anybody had any success? If so, maybe it's too fuzzy and I cannot read it. Does it say ## and then some numbers? Thanks!
  3. manbat

    manbat Active Member

    Joined:
    Apr 17, 2008
    Messages:
    3,131
    Likes Received:
    3
    Yes....you dial the symbols and numbers and press send......like making a call . the options come up!
  4. Aixelsyd

    Aixelsyd Active Member

    Joined:
    Jan 25, 2009
    Messages:
    1,406
    Likes Received:
    0
    I've tested them all and they seem to work fine. FYI some have # signs and others also include the * key in them also. Anyone thing missing will in fact cause them not to work.
  5. natieya

    natieya Member

    Joined:
    Mar 28, 2009
    Messages:
    99
    Likes Received:
    0
    I got some of them to work, but I can't read some of them because they are blurry. That's what I meant to say. Like the first few, I cannot tell what they say.

    For the ones I CAN read, they are quite helpful. Thanks, OP~
  6. GoldMembr

    GoldMembr Member

    Joined:
    Jan 29, 2009
    Messages:
    130
    Likes Received:
    0
    My Telephone Number
    # # SEND

    Programing Menu
    # # 0 7 3 8 8 7 * SEND (Type in 000000 for the code it asks for)

    User Activation Access
    # # 0 7 4 6 6 3 SEND (Type in 000000 for the code it asks for)

    Field Test Mode Enable
    # # 0 0 * * 8 3 7 8 6 6 3 3 * SEND

    Field Test Mode Disable
    # # 0 0 * * 8 3 7 8 6 6 3 3 * SEND

    Field Test Mode Menu
    # # * SEND (This is how you get in once you enable it with the above code first. Make sure to disable once you are done.)

    Phone Settings/SW Version
    # 4 3 5 7 * SEND

    P_Rev Setting (Protocol Revision)
    # # 9 5 SEND

    Keypad Lock
    HOME + SPACE BAR (Hold both same time)

    Keypad Unlock
    LEFT SOFT KEY *

    Master Unlock (If user forgets their passcode)
    Center Nav Key + Power Key simultaneously (Hold both keys 4-5 seconds and you will then be prompted to perform a reset )

    SIM Unlock Code
    1 2 3 4 5 6 7 8
  7. natieya

    natieya Member

    Joined:
    Mar 28, 2009
    Messages:
    99
    Likes Received:
    0
    You rock!

    You rock, Goldmembr! :) Thanks a bunch!
  8. teddyearp

    teddyearp Member

    Joined:
    May 21, 2009
    Messages:
    409
    Likes Received:
    0
    Thank you, too, Goldmembr. I was going to do the same thing when I first read this post, but thought there might have been some reason why wmrussell didn't, so I didn't.

    On a side note, a funny thing happened to me once. I had put a shortcut to the screenshot program in my 'start up' folder, then I went and locked my keypad. Well, everytime I went to try and unlock my keypad, screenshot just took another picture. I rebooted my phone several times, but of course it booted back up with the keypad locked! I finally figured out that I could use ActiveSync to delete the shortcut and then I was good. Duh! Now I tell screenshot to use a different key.

Share This Page