Motorola Flash Mode: Bootloader

Discussion in 'Motorola Q' started by pnasca, Sep 6, 2008.

  1. pnasca

    pnasca New Member

    Joined:
    Feb 17, 2008
    Messages:
    135
    Likes Received:
    0
    Motorola Flash Mode: Bootloader

    Ok so i have the Verizon Motorola Q. I bought it and then one day I tried to turn it on and this happened. I want to fix it. When i plug it into the wall it says charger connected please connect to the USB cable. then when i plug it into my computer it says USB connected. Then i hear a beep from my computer saying it got, but after a few seconds when hooked up to the computer the message goes away. Anybody know how to fix it. I searched and I can not do the trick with two Q's because I only have one. Any other help would be helpful. Should i try and turn it on with a different battery?

    Thanks
  2. capers

    capers New Member

    Joined:
    Feb 18, 2010
    Messages:
    2
    Likes Received:
    0
    Yes. It happened to me the battery won't charge in boot mode. So you can try with a charged battery from someone else or buy a universal cellphone battery charger. In my case, it cost Lps.300 (aprox. USD 16)

    Attached Files:

  3. txter

    txter New Member

    Joined:
    Oct 27, 2007
    Messages:
    2,749
    Likes Received:
    0
    boot mode... either try a hard reset or you will prob have to reflash the rom.

Share This Page