i screwed up my Volume increase hack settings

Discussion in 'Moto Q Hacks' started by theTechnician, Oct 10, 2007.

  1. theTechnician

    theTechnician New Member

    Joined:
    Aug 5, 2007
    Messages:
    56
    Likes Received:
    0
    i screwed up my Volume increase hack settings

    Hey guys lol this is a neat hack that DID increase my volume..I was trying to get my volume for my bluetooth louder when listening to streaming radio..etc Now i changed some of the other gain values higher and when i use the phone people are too loud where it sound like an echo and a high pitch like the mic is way up...I changed it down but still no results even after soft reset

    Can someone tell me there default values so i can set mine back..thnxs i think its 12 of them
  2. daniel

    daniel New Member

    Joined:
    Mar 7, 2007
    Messages:
    230
    Likes Received:
    0
    Ive only changed my BluetoothPathGain (i think)

    BluetoothMicPathGain = 0
    BluetoothPathGain = 18
    EmuMicPathGain = 0
    EmuPathGain = 8
    HandsetMicPathGain = 23
    HandsetPathGain = 8
    MonoHdstMicPathGain = 28
    MonoHdstPathGain = 8
    SpkrphnMicPathGain = 31
    SpkrphnPathGain = 8
    StereoHdstMicPathGain = 28
    StereoHdstPathGain = 8
  3. theTechnician

    theTechnician New Member

    Joined:
    Aug 5, 2007
    Messages:
    56
    Likes Received:
    0
    thanks a million man now i wont need a hearing aid too soon!
  4. cryptk

    cryptk New Member

    Joined:
    Nov 19, 2007
    Messages:
    68
    Likes Received:
    0
    dear god I love all of you... I will be handing out some +rep on this one!

    I just got a chatterbox, itis basically a 2 way radio that you install on a motorcycle helmet. It has bluetooth in it and the Q recognizes it as both a hands-free and as a stereo headset. All is good on the bluetooth for calls, but listening to media (music) it is WAY to quiet. now I see why...

    BluetoothPathGain = 18
    StereoHdstPathGain = 8

    so i am thinking that is I increase the stereoheadsetpathgain to match the bluetoothpathgain then it should be about the same volume as my calls and I will actually be able to hear my music!
  5. jaycsin

    jaycsin New Member

    Joined:
    May 12, 2008
    Messages:
    8
    Likes Received:
    0

    Be careful the music was set lower for a reason....So you can hear the dump truck that is about to smash you to bits! Might want to turn it down a bit.:laugh2:
  6. mike250rs

    mike250rs New Member

    Joined:
    Nov 24, 2007
    Messages:
    14,284
    Likes Received:
    0
    may want to try 12 or so to start.

    ...as always power cycle the device after a registy edit for it to take affect. Also saving a copy before hacking at it is a good practice.
  7. cryptk

    cryptk New Member

    Joined:
    Nov 19, 2007
    Messages:
    68
    Likes Received:
    0
    got it all dialed in now. Loud enough that I can hear the music, not so loud that I can't hear traffic. Thanks ppl ;)
  8. nettech_gt

    nettech_gt New Member

    Joined:
    Apr 30, 2008
    Messages:
    48
    Likes Received:
    0
  9. Q-er

    Q-er New Member

    Joined:
    Jun 5, 2008
    Messages:
    36
    Likes Received:
    0
    Hi! Just found this site about a week ago and LOVE it - the fyi's, fixes, and of course the witty humor. Anyhow, I made this registry edit and it adjusted the BT volume fine, but now when I use WindowsMedia, the volume won't go up or down - just one steady volume. Is it the EmuPathGain that needs to be changed? Please help if possible. (i've gotta Q9m) Thanks
    (to you and all the great tech-ies/hackers out there)
  10. stockspeed

    stockspeed Member

    Joined:
    Feb 17, 2008
    Messages:
    966
    Likes Received:
    1
    Wired headset volume between In-Call and Media Player

    I changed these setting a while back, but when the volume is high enough for the media player, its way to high on the same headset when I'm talking on the phone. I don't use bluetooth...so those are both 0. I've set the headset to 4 and the phone call volume is good but can't hear muic from media player. If i set the headset to 12 the music is loud enough but the phone calls will make me deaf in about a week. :)

    BluetoothMicPathGain = 0
    BluetoothPathGain = 0
    EmuMicPathGain = 0 ---Anyone lnow what these are (EMU)?
    EmuPathGain = 8---Anyone lnow what these are (EMU)?
    HandsetMicPathGain = 23
    HandsetPathGain = 8
    MonoHdstMicPathGain = 28
    MonoHdstPathGain = 8
    SpkrphnMicPathGain = 31
    SpkrphnPathGain = 8
    StereoHdstMicPathGain = 28
    StereoHdstPathGain = 8

    Also, anyone know what the values in here do? They seem as if they'd be the likely suspects because it's called the 'InCallAudioGains'.

    HKLM\Software\Motorola\BPCTRLR\WaveDev\InCallAudioGains
    ActiveAudioDevice = 32 ---was going to change, but it might be a device ID?
    MOT_SND_DEVICE_BTHEADSETGain = 3
    MOT_SND_DEVICE_EMUGain = 3
    MOT_SND_DEVICE_HANDSETGain = 5
    MOT_SND_DEVICE_HEADSETGain = 0---or maybe this to -8? wonder if it would take negative values?
    MOT_SND_DEVICE_SPKR_PHONEGain = 2
  11. hello

    hello New Member

    Joined:
    May 29, 2008
    Messages:
    327
    Likes Received:
    0
    I don't have BaseGains
    what should i do?


    [​IMG]


  12. kogama

    kogama Active Member

    Joined:
    May 16, 2008
    Messages:
    2,594
    Likes Received:
    0
    if you lower the hdsetpathgain when you make a call it should be alright like i did

    and if even that doesnt work when your in a call use the scroll wheel and slide it down a little
  13. hello

    hello New Member

    Joined:
    May 29, 2008
    Messages:
    327
    Likes Received:
    0
    i wanna just increase volume, current voule MAX:7 but i wanna make 9.
    But i don't have needed registry keys :(
    I'm listen music via speakerphone and I need more louder sound.
  14. kogama

    kogama Active Member

    Joined:
    May 16, 2008
    Messages:
    2,594
    Likes Received:
    0
    i set my gains to 11 and use tcpmp

    i increased emupath to 11

    monohdstpath to 11

    spkrphnpath to 11

    steropath to 11

    i did that and my music is insane if you increase to 12 the sound is distorted and music starts to skip
  15. hello

    hello New Member

    Joined:
    May 29, 2008
    Messages:
    327
    Likes Received:
    0
    i can't find WHERE?
    where is registry keys? just tell me!
  16. kogama

    kogama Active Member

    Joined:
    May 16, 2008
    Messages:
    2,594
    Likes Received:
    0
    did you check HKLM\Software\Motorola\BPCTRLR\WaveDev\BaseGains using your phone's registry...see if theres a difference though i doubt it..........
  17. hello

    hello New Member

    Joined:
    May 29, 2008
    Messages:
    327
    Likes Received:
    0
    Maybe it will helps me?
    from Glofish forum (russian text)
  18. hello

    hello New Member

    Joined:
    May 29, 2008
    Messages:
    327
    Likes Received:
    0
    OF COURSEW I CHECKED IT!
    take a look my upper screenshot.
    I don't have BaseGains - folder (key?) there.
    But everything working fine. I have Moto Q 9h, FIDO.ca

    I wanna just little increase volume, when i'm listen music or wathcing movies, with speakerphone (not headsets)

    (sory for my ENglish :foot:)
  19. kogama

    kogama Active Member

    Joined:
    May 16, 2008
    Messages:
    2,594
    Likes Received:
    0
    sigh....so in both your phone and the cp the keys dont come up........first of all tell me this do you have any backup software incase what i tell you to do goes wrong...
  20. hello

    hello New Member

    Joined:
    May 29, 2008
    Messages:
    327
    Likes Received:
    0
    yes, i have backups! i'm just export my keys to "backup.reg"

Share This Page