Data Call Problems with F/W 1.30

Discussion in 'Moto Q 9n' started by jhalsey205, Feb 28, 2009.

  1. jhalsey205

    jhalsey205 Member

    Joined:
    Oct 29, 2006
    Messages:
    692
    Likes Received:
    0
    Data Call Problems with F/W 1.30

    Interesting development; I just reactivated my H/W 3.2C running F/W 1.30, and I am unable to initiate a data call. I have been using my H/W 3.2B running F/W 1.31 for the past 2 weeks ... and which had the same data call issue when it was flashed with F/W 1.30, and which resolved when reflashed with F/W 1.31.

    This is interesting as I had previously been able to place data calls on this device, and have made no changes to the setup beyond deactivating/re-activating. I guess a re-flash to F/W 1.31.

    John
  2. Aixelsyd

    Aixelsyd Active Member

    Joined:
    Jan 25, 2009
    Messages:
    1,406
    Likes Received:
    0
    Same exact issue I had with mine getting data to work on the 1.30 flash. So all of my Naps whether a H/W3.2B or C are now flashed to 1.31 and have not had an issue.

    I can say this also tho as I got a buddy a Nap which if I recall correctly was a H/W3.2c ( 4dots on d-pad). It came with the 1.30 flash on it, he activated it and could not get data either. So I had to head over and flash his to the 1.31 file and reactivate and all was good to go.
  3. jhalsey205

    jhalsey205 Member

    Joined:
    Oct 29, 2006
    Messages:
    692
    Likes Received:
    0
    Well - reflashed to 1.31 and all is well...
  4. Aixelsyd

    Aixelsyd Active Member

    Joined:
    Jan 25, 2009
    Messages:
    1,406
    Likes Received:
    0
    Nice, and that is all that counts that it is working. I've yet to have any luck getting data to work with the 1.30 flash on any phone I've had. So I just got to the point of flashing them right off the bat to 1.31.

Share This Page