can't sync.

Discussion in 'Mac and Motorola Q' started by dunc, Oct 14, 2006.

  1. dunc

    dunc New Member

    Joined:
    Jun 28, 2006
    Messages:
    6
    Likes Received:
    0
    can't sync.

    hi there.

    i'm having less and less success synching up with missing sync these days, airport is always off, both machines re-booted, and its still about 1 in 10.

    i suspect it's some conflict on my computer, and was wondering if anyone has any ideas based on the lod readout listed below.

    here's a copy of the log. problem starts at 10:15:51 when bt chanel closes

    thanks for looking dunc

    10/14/06 10:14:57 Monitor: bt: data: CLIENT
    10/14/06 10:14:57 Monitor: Connection status from 0 to 150
    10/14/06 10:14:57 Monitor: bt: Device initialized successfully.
    10/14/06 10:14:57 Monitor: bt: About to make connection
    10/14/06 10:14:57 Monitor: Connection status from 150 to 175
    10/14/06 10:14:57 Monitor: bt: forked pppd with pid: 309
    10/14/06 10:14:57 Monitor: bt: activate check for sharing
    10/14/06 10:14:58 Monitor: Firewall setup: 5
    10/14/06 10:14:58 Monitor: Connection status from 175 to 200
    10/14/06 10:14:58 Monitor: bt: Thread creation1 succeeded
    10/14/06 10:14:58 Monitor: bt: Thread creation2 succeeded
    10/14/06 10:15:51 Monitor: bt channel closed. channel=$3a8410 _channel=3a8410
    10/14/06 10:15:53 Monitor: bluetooth connection closed during read (location 2)
    10/14/06 10:15:53 Monitor: bt: finished relaying 1
    10/14/06 10:15:53 Monitor: Reseting firewall: 5 (0x00000005)
    10/14/06 10:15:54 Monitor: bt: deactivate check for sharing
    10/14/06 10:15:54 Monitor: bt: MyCloseSerialPort succeeded :9
    10/14/06 10:15:54 Monitor: Listener: In cancel
    10/14/06 10:15:54 Monitor: bt: BSD path: /dev/cu.Bluetooth-PDA-Sync
    10/14/06 10:15:54 Monitor: Listener: closeCurrentDeviceConnection 0, state=1
    10/14/06 10:15:54 Monitor: Listener: asyncdserver setConnectedMonitor clear
    10/14/06 10:15:54 Monitor: asyncd sent allowConnections: 1
    10/14/06 10:15:54 Monitor: Listener: Reset
    10/14/06 10:15:54 Monitor: Listener: closeCurrentDeviceConnection 0, state=1
    10/14/06 10:15:56 Monitor: bt: MyOpenSerialPort succeeded :9

Share This Page